Models
>
G7CG3665XS00
G7CG3665XS00 Whirlpool Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for G7CG3665XS00
Viewing 3 of 3Manuals & Guides for G7CG3665XS00
Click to downloadInstall
Installation Instructions
(3.43MB)
Manual
Owner's Manuals
(0.97MB)
Specs
Product Specifications Sheet
(1.62MB)
Keep searches simple, eg. "belt" or "pump".
$5.43
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
In Stock
In Stock
In Stock
Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.
No Longer Available
$7.57
This is not a pad or foot for the bottom of the grate. This grommet goes behind the knob.
In Stock
$35.35
Part is located on top of the igniter switch that's next to the gas valve. Helps regulate gas flow and the amount of normal leakage that may occur.
In Stock
In Stock
$156.15
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
In Stock
In Stock
This canning element is typically used for Whirlpool/Kenmore brand electric ranges. This element has a 3/4 raised frame for additional support, 5 turns, and carries 2600 watts. It also comes with an infinite switch.
No Longer Available
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Shelley from Powell, WY
- Parts Used:
- 242905
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I wanted a second 8" canning element for home canning
I purchased an 8" canning element for my new Kenmore Stove. The ordering process was easy. I printed my order out. I did not receive a confirmation by email, however I received the part in a timely manner. I was satisfied with the process.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from ROSEVILLE, CA
- Parts Used:
- W10833887
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Surface ignitor not working on one burner
Disconnect power and turn off gas. Remove all grills, knobs and burners. Under the burners are 2 Phillips head screws. Remove all 10 screws. Remove surface plate. Remove the one igniter with problem. There is a small metal clip holding it in place. Remove the wire. Install new ignitor and reverse all steps above.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond from Allen, TX
- Parts Used:
- WP3801F935-51, WP7101P062-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
new countertops required remounting the gas cooktop
A very simple repair.
I inserted the brackets and screwed them in position
I inserted the brackets and screwed them in position
Was this instruction helpful to you?
Thank you for voting!