OEM Milwaukee Hammer Drill Parts & Accessories

120V Carbon Brush

$4.99

Fix Number: FIX11877180
Manufacturer Part Number: 22-18-0032

Keyless Chuck Assembly

$51.44

Fix Number: FIX17016966
Manufacturer Part Number: 42-66-1006

Keyless Chuck Assembly

1/8" Collet

$6.27

Fix Number: FIX10129511
Manufacturer Part Number: 42-77-0400

This is an authentically sourced collet for rotary tools. This collet is for using bits with 1/8-Inch arbors. Over time and heavy use, the collet will wear and will require replacing. You may need a collet nut wrench (sold separately) to remove the collet nut.

Belt Clip Assembly.

$6.15

Fix Number: FIX10129406
Manufacturer Part Number: 42-70-2653

Ball Bearing

$3.99

★★★★★

2 Reviews

Fix Number: FIX10116783
Manufacturer Part Number: 02-04-0033

Brush Card Assembly

$15.14

Fix Number: FIX10122416
Manufacturer Part Number: 22-22-2602

This is a genuine brush card assembly for a drill/driver. The function of this part is to hold the carbon brushes around the armature, providing a secure contact. This assembly includes a plastic holder ring, four metal brush holders with springs and four carbon brushes with lead wires. For this repair you will need a screwdriver and will need to remove the cover to get access the part.

Switch

$18.83

★★★★★

1 Review

Fix Number: FIX10123482
Manufacturer Part Number: 23-66-0177

This is an OEM trigger switch with four internal terminals. The switch controls the on/off and varying speed functions. It is common for the switch of a power tool to wear and malfunction over the use of a tool and require replacement. A few signs that will indicate a replacement is need is If the tool will not turn on when you engage the switch, it requires multiple tries to turn on, or the variable speeds are not working.

Quik-Lok Power Cord Set

$43.96

Fix Number: FIX10134042
Manufacturer Part Number: 48-76-4008

This Milwaukee Quik-Lok® cord is a genuine OEM replacement part, it is sold individually. This is a three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord, line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. The Cord has a 5-15P NEMA type plug.

Installation Instructions

Brian from ATHENS, AL

Had a bad cord

Insert end turned to the right. Done. Read more...

Watch the install video

Brush Card Assembly

$15.14

Fix Number: FIX10120878
Manufacturer Part Number: 14-46-2012

This is a manufacturer-approved brush card assembly. The brush card is an easy way to service the brushes on your power tool. The assembly includes the brushes, the brush springs, holders, and the wire leads that go to the motor. This is a simple repair that will require you to release the spring tension on the brush and then secure the brush card in the appropriate position.

Bit Holder

$5.50

Fix Number: FIX10130527
Manufacturer Part Number: 43-72-0550

Milwaukee Hammer Drill Parts

Popular Milwaukee Hammer Drill Parts

Installation Instructions

Appliance Type

Popular Milwaukee Hammer Drill Models

Milwaukee Hammer Drill Parts

Start With Your Model Number

Popular Milwaukee Hammer Drill Parts

Installation Instructions

Appliance Type

Popular Milwaukee Hammer Drill Models