Milwaukee Impact Driver Parts

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Milwaukee Appliance Parts
Shop By Appliance Type

Popular Milwaukee Impact Driver Parts

Handle Assembly - Single Speed – Part Number: 31-44-2661
Handle Assembly - Single Speed
$20.92
On Order
Fix Number
FIX17016953
Manufacturer Part Number
31-44-2661
Handle Assembly - Single Speed
3/8" Friction Ring – Part Number: 44-90-1050
3/8" Friction Ring
$4.99
In Stock
Fix Number
FIX11878410
Manufacturer Part Number
44-90-1050
This is a metal friction ring, sold individually and used in impact wrenches as part of the anvil assembly. It measures roughly 3/8-Inches. When the socket is installed, the ring is compressed, and the tension that is created is what holds the socket securely in place. Over the lifetime of the tool, the ring can compress too small, and it will no longer fit properly in the socket, and will need to be replaced. For this repair you will need a pick to pry off the friction ring, a pair of needle nose pliers, retaining ring pliers, and a small screwdriver.
3/8" O-Ring – Part Number: 34-40-1885
3/8" O-Ring
$4.99
In Stock
Fix Number
FIX11877651
Manufacturer Part Number
34-40-1885
This O-ring is attached to the anvil and backs up the tension ring. The O-ring minimizes how much the tension ring can compress when a socket is installed. O-rings are common wear parts that tend to harden and deteriorate over time due to their rubber material. A sign that this O-ring needs to be replaced is if the socket is no longer being held properly on the anvil. This manufacturer-approved part is sold individually.
1/8" Collet – Part Number: 42-77-0400
1/8" Collet
$6.27
In Stock
Fix Number
FIX10129511
Manufacturer Part Number
42-77-0400
This is an authentically sourced collet for rotary tools. This collet is for using bits with 1/8-Inch arbors. Over time and heavy use, the collet will wear and will require replacing. You may need a collet nut wrench (sold separately) to remove the collet nut.
Belt Clip Assembly. – Part Number: 42-70-2653
Belt Clip Assembly.
$6.15
In Stock
Fix Number
FIX10129406
Manufacturer Part Number
42-70-2653
Ring Friction – Part Number: 44-90-4530
Ring Friction
$5.64
In Stock
Fix Number
FIX11878417
Manufacturer Part Number
44-90-4530
Spring – Part Number: 40-50-0925
Spring
$4.99
In Stock
Fix Number
FIX11877727
Manufacturer Part Number
40-50-0925
Detent Pin – Part Number: 44-60-0597
Detent Pin
$4.99
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11878296
Manufacturer Part Number
44-60-0597
This is a genuine detent pin, sold individually. The detent pin is for impact wrenches and is driven by the anvil detent spring (sold separately), which secures the driver socket of the wrench. This repair is considered easy by our customers and should take less than fifteen minutes to complete. You will need a screwdriver and a pair of pliers to get the job done.
Watch the install video
Brush Card Assembly – Part Number: 14-46-2012
Brush Card Assembly
$15.14
In Stock
Fix Number
FIX10120878
Manufacturer Part Number
14-46-2012
This is a manufacturer-approved brush card assembly. The brush card is an easy way to service the brushes on your power tool. The assembly includes the brushes, the brush springs, holders, and the wire leads that go to the motor. This is a simple repair that will require you to release the spring tension on the brush and then secure the brush card in the appropriate position.
Anvil Spring – Part Number: 40-50-0012
Anvil Spring
$5.19
In Stock
Fix Number
FIX11877704
Manufacturer Part Number
40-50-0012

Appliance Type

Popular Milwaukee Impact Driver Models

View More
+